| Moisture ingress evaluation of encapsulation materials using multiphysics modelling for perovskite solar cell packaging | 10.1016/j.nxmate.2026.101694 | 2026-04-01 |
| Evaluation of alkali surface modification on pyrolysis chars for use as supplementary cementitious materials in mortars | 10.1016/j.dibe.2026.100871 | 2026-03 |
| Critical weight percent of graphene nanoplatelets (GNPs) that optimizes water barrier and transport properties of ethylene vinyl acetate (EVA) for improved photovoltaic module packaging reliability | 10.1016/j.nxmate.2026.101762 | 2026-02-18 |
| Developing New Water-Based Drilling Fluid Additives for Mitigating Filtration Loss at High Pressure and High Temperature | 10.3390/pr14020208 | 2026-01-07 |
| Probabilistic Assessment of Engineered Timber Reusability After Moisture Exposure | 10.1007/978-981-95-8489-5_50 | 2026 |
| Utilising 'Filter Cake' for Low-Carbon Non-structural Concrete | 10.5703/1288284318173 | 2025-10-15 |
| Optimised steel slag carbonation for enhanced CO2 sequestration: | 10.1016/j.jenvman.2025.126496 | 2025-09-01 |
| Effect of Operating Ambient Temperatures on Degradation of Solder Joints in IGBT Power Module | 10.1007/s11664-025-12103-2 | 2025-06-19 |
| Development of a Photovoltaic (PV) Solar Energy Technology Training Module for STEM Undergraduates for Solar Energy Sector Deployment | 10.12973/jmste.2.1.33 | 2025-06-15 |
| A study on recirculating process water from hydrothermal carbonisation of spent brewing grains | No DOI available. | 2025-06-12 |
| Biobased bitumen binder through hydrothermal liquefaction of waste biomass | No DOI available. | 2025-06-11 |
| Co-processing of waste cooking oil and hemp-shives for an intensified production of advanced biodiesel | No DOI available. | 2025-06-09 |
| The application of deep eutectic solvents for greener extraction of chitin from black soldier flies (Hermetia illucens) | No DOI available. | 2025-06-09 |
| Field Study on CO2 Sequestration through Mineral Carbonation and Enhanced Weathering using Waste Clays | 10.3997/2214-4609.202510993 | 2025-05-26 |
| Biodegradable eco-friendly drilling fluid | 10.1007/s11696-025-04052-1 | 2025-05-06 |
| Elucidating sequential laser remelting in tailoring microstructure and mechanical performance of laser-directed energy deposited Hastelloy-X | 10.1007/s00170-025-15084-y | 2025-01-28 |
| Novel synthesis and application of zeolite-Y from waste clay for efficient CO2 capture and water purification | 10.1016/j.colsurfa.2024.135460 | 2025-01-05 |
| Recovering the properties of aged bitumen using bio-rejuvenators derived from municipal wastes | 10.1016/j.conbuildmat.2024.137268 | 2024-08-09 |
| Introducing a novel optimised binder activator with Redcar mudstone feedstock in the UK for geopolymer cement formation | 10.1016/j.colsurfa.2024.134650 | 2024-06-29 |
| Feasibility Study of Using Redcar Mudstone Formation in the UK for Mineral Carbonation and Enhanced Weathering | 10.3997/2214-4609.2024101051 | 2024-06-10 |
| Advancing sustainable building through passive cooling with phase change materials, a comprehensive literature review | 10.1016/j.enbuild.2024.114164 | 2024-06-01 |
| Critical methods of geopolymer feedstocks activation for suitable industrial applications | 10.1016/j.heliyon.2024.e29771 | 2024-05-15 |
| Sintered Bottom and Vitrified Silica Ashes Derived from Incinerated Municipal Solid Waste as Circular Economy-Friendly Partial Replacements for Cement in Mortars | 10.1007/s12649-023-02347-6 | 2024-05 |
| Visualizing and Evaluating Microbubbles in Multiphase Flow Applications | 10.3390/fluids9030058 | 2024-02-27 |
| A state of the art of review on factors affecting the enhanced weathering in agricultural soil: strategies for carbon sequestration and climate mitigation | 10.1007/s11356-024-32498-5 | 2024-02-19 |
| Exploring the potential of steel slag waste for carbon sequestration through mineral carbonation | 10.1016/j.jenvman.2023.119835 | 2024-02-01 |
| Porosity-dependent stability analysis of bio-inspired cellular nanocomposite shells | 10.1016/j.ijmecsci.2023.108763 | 2024-02-01 |
| Mineral wastes | 10.1016/b978-0-443-19106-0.00012-9 | 2024-01-01 |
| N-doped and Se incorporated reduced graphene oxide nanocomposite as a new adsorbent for efficient Ni(II) ion removal from aqueous sample | 10.1007/s42247-023-00608-7 | 2023-12-19 |
| Strength, mineralogical, microstructural and CO2 emission assessment of waste mortars comprising excavated soil, scallop shells and blast furnace slag | 10.1016/j.conbuildmat.2023.134425 | 2023-12-07 |
| Circular Approaches for Waste Based Geopolymer Feedstocks | No DOI available. | 2023-11-30 |
| Closing the loop in the Circular Economy | No DOI available. | 2023-11-30 |
| Nanoengineered, Pd-doped Co@C nanoparticles as an effective electrocatalyst for OER in alkaline seawater electrolysis | 10.1038/s41598-023-46292-9 | 2023-11-27 |
| Strong improvement of permeability and rejection performance of graphene oxide membrane by engineered interlayer spacing | 10.1016/j.memlet.2023.100065 | 2023-11-24 |
| Feasibility evaluation of bio-waste derived, plastic-waste modified binder rejuvenators | 10.1201/9781003387374 | 2023-11-15 |
| Biochar from brown algae: Production, activation, and characterisation | 10.1016/j.biteb.2023.101688 | 2023-11-04 |
| A comparative study of acid‑activated non‑expandable kaolinite and expandable montmorillonite for their CO2 sequestration capacity | 10.1007/s11144-023-02521-w | 2023-10-25 |
| Characteristic of CO2 sequestration in steel slag wastes at elevated temperature and longer contact time | No DOI available. | 2023-10-13 |
| Steel slag wastes to fight the climate change | No DOI available. | 2023-10-13 |
| Experimental measurements on the microbubble characteristics and dissolved oxygen (DO) in water using single and twin-Venturi type microbubble generators | 10.1016/j.ces.2023.118994 | 2023-10-05 |
| Process-based life cycle assessment of waste clay for mineral carbonation and enhanced weathering: A case study for northeast England, UK | 10.1016/j.jclepro.2023.138914 | 2023-10 |
| Materials waste reduction | 10.1016/B978-0-12-819160-6.00016-0 | 2022-11-30 |
| A Review on the Application of Metal–Organic Frameworks (MOFs) in Pressure Swing Adsorption (PSA) Nitrogen Gas Generation | 10.1021/acs.iecr.2c00222 | 2022-07-13 |
| Geochemical modelling of CO2-Clay mineral interaction during Geological Storage of Carbon Dioxide | No DOI available. | 2022-06-22 |
| Artificial Intelligence-based Design Approach to Magnetics | No DOI available. | 2022 |
| Prospects of using chars derived from mixed post waste plastic pyrolysis in civil engineering applications | 10.1016/j.jclepro.2021.128212 | 2021-07-14 |
| Application of Water-Soluble Polymer/Biopolymer Combined with a Biosurfactant in Oil-Wet Fractured Carbonate Reservoirs | 10.1021/acsomega.1c00855 | 2021-06-09 |
| The behavior of Nitinol Wire Bundles for Structural Applications | No DOI available. | 2021-03-30 |
| Mechanical behaviour of soil waste-derived geopolymer mixtures for construction | No DOI available. | 2021 |
| Disposal and Recovery Approaches for Reinforced Plastic Products | 10.1016/B978-0-12-820352-1.00068-7 | 2020-11-23 |
| Lightweighting of Wishbone Finite Element Analysis | No DOI available. | 2020-02-11 |
| Studying the effect of acidic and basic species on the physiochemical properties of polymer and biopolymer at different operational conditions | 10.1016/j.molliq.2019.112424 | 2020-01-07 |
| Effect of Relative Density on Compressive Load Response of Crumpled Aluminium Foil Mesh | 10.3390/ma12234018 | 2019-12-03 |
| 3D printing of intricate sand cores for complex copper castings | No DOI available. | 2019 |
| A Comparison Between Tuyere Core Types – Cooling Efficiency and Manufacturability | No DOI available. | 2019 |
| Comparison of impact energy absorbance by various combinations of hip protector and flooring material | https://www.ingentaconnect.com/content/wk/copr/2018/00000029/00000006/art00014 | 2018-12-31 |
| New Insight into the Influence of Rhamnolipid Bio-Surfactant on the Carbonate Rock/Water/Oil Interaction at Elevated Temperature | 10.3390/resources7040075 | 2018-11-16 |
| Comparison of impact energy absorbance by various combinations of hip protector and flooring material | No DOI available. | 2018 |
| DIGITAL TWIN METHODOLOGY FOR COMPRESSION MOULDED THERMOPLASTIC COMPOSITE OPTIMISATION | No DOI available. | 2018 |
| Digital Composite Manufacturing - An Enabling Technology | No DOI available. | 2018 |
| Digital Twin Methodology For Compression Moulded Thermoplastic Composite Optimisation. | No DOI available. | 2018 |
| EFFECT OF TEMPERATURE ON CONDUCTIVITY OF PLA-CARBON 3D PRINTED COMPONENTS | No DOI available. | 2018 |
| Effect Of Temperature On Conductivity Of PLA-Carbon 3D Printed Components | No DOI available. | 2018 |
| Effect of Temperature on Conductivity of PLA-Carbon 3D Printed Components. | No DOI available. | 2018 |
| INCREASING COMPOSITE HAND-LAYUP REPEATABILITY USING END-END DESIGN AND MANUFACTURE SIMULATION SOFTWARE | No DOI available. | 2018 |
| Increased Composite Hand-Layup Repeatability Using End-End Design And Manufacture Simulation Software | No DOI available. | 2018 |
| Thermo-mechanical deformation degradation of crystalline silicon photovoltaic (c-Si PV) module in operation | https://doi.org/10.1016/j.engfailanal.2017.11.009 | 2018 |
| Waste reduction in compression moulded thermoplastic laminates using digital manufacturing. | No DOI available. | 2018 |
| Understanding high force transmission on trauma in the glenohumeral joint | No DOI available. | 2017-03-17 |
| Aligning plastics component manufacturers with OEM driven 4.0 initiatives in the automotive sector | No DOI available. | 2017 |
| How a blended learning approach supported the learning and management of a large and diverse group of learners | No DOI available. | 2017 |
| Purchasing Management: The Optimisation of Product Variance | No DOI available. | 2017 |
| Purchasing Management: The Optimisation of Product Variance | https://doi.org/10.1016/j.promfg.2017.07.266 | 2017 |
| Control centre purchasing: a lean method for the optimization of variance | No DOI available. | 2016-02-25 |
| Assessment of Microstructural Effect on Weld Fatigue Prediction in the Oil and Gas Sector | No DOI available. | 2015 |
| Leakage Inductance Estimation Of Mva Range Single Phase Transformers | No DOI available. | 2015 |
| Design and validation of a novel combined ex-vivo testing medium for investigating forces in the glenohumeral joint | 10.1097/BCO.0000000000000096 | 2014 |
| Manufacture and Instrumentation of Bio-Mechanical Shoulder Testing Rig for Medical Applications | No DOI available. | 2014 |
| Validation of a novel mechanical testing rig for investigating forces in the glenohumeral joint | 10.1097/BCO.0b013e318247caba | 2012-03-01 |
| The development of an in vitro glenohumeral testing rig | 10.1504/IJECB.2012.049808 | 2012 |
| Validation of a novel mechanical testing rig for investigating forces in the glenohumeral joint | No DOI available. | 2012 |
| Biomechanical evaluation of optimal humeral fracture fixation devices | No DOI available. | 2010-09-03 |
| Bracing shoulder injuries caused by rear impacts | No DOI available. | 2009 |
| Experimental Evaluation of Three Clay Minerals for CO2 Mineralisation | 10.3997/2214-4609.2026101559 | |